Book online & save
$25 off any fridge repair when you book through the website.
Frigidaire refrigerator service
Fast, affordable Frigidaire refrigerator repair at your home. Same-day visits in all four NYC boroughs.
Book online & save $25
Takes 30 seconds. We call back to confirm your time.
or call (315) 860-0006
We provide fast, in-home Frigidaire refrigerator diagnostics and repairs across all five boroughs, focusing on the real cause—not guesswork.
Our technicians arrive with professional tools, common parts, and a clear plan to get your unit stable again the same day whenever possible.
For dependable Refrigerator Repair Services in New York City, we help you avoid repeat breakdowns and protect your groceries from temperature swings. When you call us, you get straightforward recommendations, careful work, and a repair that aims to restore long-term performance.

Repairs
Genuine Frigidaire parts. Most repairs finished in one visit.
When the fridge compartment stops cooling, it’s often tied to airflow restrictions, a failing evaporator fan, dirty condenser coils, or a control issue that prevents proper temperature regulation.
We pinpoint the failure, repair or replace the worn component, and calibrate the system so cold air circulates evenly again.
The result is restored cooling performance, quieter operation, and prevention of food spoilage before it becomes an expensive loss. Book our service today and we’ll get your refrigerator back to reliable temperatures quickly.
A freezer that won’t freeze can come from defrost-system failures, a weak compressor start, low refrigerant pressure, or sensor problems that disrupt the cooling cycle.
We run full checks, correct the root fault, and verify the unit can reach and hold safe freezing temperatures.
You’ll get restored cooling performance, quieter operation, and prevention of food spoilage—especially for stored meats and frozen meals. Schedule your repair now so your freezer returns to solid, consistent freezing.
If the ice maker stops producing ice, the cause may be a clogged water line, a faulty inlet valve, a frozen fill tube, or a worn ice maker module.
We inspect water supply and electrical controls, clear restrictions, and replace failing parts so ice production resumes at normal speed. This helps maintain restored cooling performance, supports quieter operation by preventing cycling issues, and reduces the risk of food spoilage when your fridge struggles with temperature stability.
Call to book service and we’ll restore your ice maker function without delays.
Water leaks can come from a blocked defrost drain, cracked drain pan, loose water connections, or a damaged filter housing that slowly drips under the unit.
We locate the source, clear the drain or repair the water line, and ensure everything seals properly to prevent repeat puddles.
That means restored cooling performance, quieter operation, and prevention of food spoilage by keeping humidity and airflow under control. Book an appointment and we’ll stop the leak before it damages floors or cabinets.
Unusual humming, rattling, clicking, or grinding often points to a failing fan motor, worn bearings, an unbalanced compressor mount, or ice buildup interfering with moving parts.
We identify exactly where the sound originates, fix the mechanical issue, and test the refrigerator under load to confirm stable operation. You’ll notice quieter operation, restored cooling performance, and prevention of food spoilage by ensuring the system runs smoothly without overheating or cycling errors.
Schedule service now and we’ll bring your fridge back to calm, efficient performance.
Error codes usually signal a specific sensor, defrost, fan, or communication problem, and ignoring them can lead to temperature instability or a full shutdown. We interpret the code, confirm it with testing, and complete the targeted repair—then clear the error and verify normal readings.
This restores cooling performance, improves quieter operation by preventing repeated fault cycling, and supports prevention of food spoilage through steady temperatures.
Book the repair today and we’ll resolve the code and get your refrigerator running normally again.
Error codes
Frigidaire codes usually fall into a few repeat categories: airflow problems (fans), temperature running too high, sensor faults, or a “no communication” issue between the control board and the display. Use the table below to quickly decode the message and start with the safest checks first.
| Error Code | Problem | Potential Solution |
|---|---|---|
| SY EF / 5Y EF | Evaporator fan circuit issue (fan motor / wiring / control signal) | Listen for the evaporator fan. If it’s silent, check for ice buildup blocking the fan, then power-cycle the unit. If the code returns, inspect wiring/connectors; the fan motor or main control board may be at fault. |
| H / HI | High temperature warning (fridge/freezer too warm) | Confirm doors close fully and gaskets seal tight. Don’t overload vents; allow airflow. Clean condenser coils and give the fridge time to recover (especially after loading groceries or a power outage). |
| SY CE / SY CF / Er CE | Communication error (main control ↔ user interface) | Unplug for 3–5 minutes and restart. Reseat the display/control connectors if accessible. If it keeps coming back, suspect a wiring harness, UI board, or main control board issue. |
| SH / 5H | Sensor short (temperature sensor/thermistor shorted) | Power off the unit, check the sensor connector for moisture/corrosion and damaged wiring. If wiring is intact, the thermistor/sensor likely needs replacement. |
| OP | Open circuit (door open or sensor disconnected) | Make sure the door is fully closed and nothing is preventing a tight seal. If doors are fine, inspect sensor plugs/harness connections—one may be loose or unplugged. |
| DI SP | Ice dispenser issue (ice jam in chute) | Clear the chute: remove clumped ice, then test dispensing again. If it keeps jamming, check for moisture causing clumps and verify the door/flap closes properly. |
| Sb / SB | Sabbath mode is enabled | Turn off Sabbath mode using your model’s button combo (varies by unit). If you’re unsure, check the user manual for the exact steps. |
| Flashing lights / blinking display | Power surge event or unstable control board behavior | Do a full reset (unplug 3–5 minutes). If it repeats, try a different outlet/surge protection and inspect for loose connectors. Persistent flashing often points to a failing main control board. |
Code still showing after a reset? Book a technician or call (315) 860-0006.
Plus older and discontinued Frigidaire models.
Genuine OEM parts whenever available.
Fridge types
Frigidaire, Gallery and Professional refrigerators found in countless NYC apartments. Freestanding, built-in or compact — we fix it at your home.
$25 off any fridge repair when you book through the website.
No trip charge when you go ahead with the repair.
Technicians out 7 days a week, 7 am – 10 pm, holidays included.
How it works
Reviews
My fridge stopped cooling right before the weekend, and I was panicking. These guys came the same day, diagnosed the issue quickly, and had it running again in no time. Super professional and friendly — highly recommend!
Great service! The technician quickly fixed my fridge and was professional throughout the entire process. Highly recommend for any fridge repairs in NYC! And when booking online I received a $25 discount.
Excellent fridge repair service! Booking was quick and hassle-free. The technician showed up right on schedule, diagnosed the issue immediately, and explained what needed to be done in simple terms.
Great experience from start to finish. Easy to book, the technician arrived on time, explained everything clearly, and fixed the problem fast. It's rare to find this level of service these days!
Service areas
Same-day fridge repair in Manhattan, Brooklyn, Queens and Staten Island.
FAQ
Most appointments are available same day, with emergency service for urgent cooling failures.
Yes, smart-system diagnostics, sensor calibration, and control board repairs are fully supported.
Often yes—many issues can be repaired affordably, and proper diagnosis prevents unnecessary replacement.
Pricing varies by component, model, and labor, but customers receive clear estimates before work begins.
Yes, technicians service Manhattan, Brooklyn, Queens, and Staten Island.
We’re open Monday through Saturday, from 7:00 AM to 10:00 PM. Feel free to call us or book online during those hours.
Book online and save $25, or call and talk to a technician now.